A grinding wheel diamond wheel in our lives is often used for this kind of material of the diamond wheel, its production process is how to do? Generally, the conventional diamond grindstone wire saw in the surface of the fine metal wire through the electrodeposition of nickel or a thermosetting resin layer of diamond abrasive grains is fixed, for the precision cutting of the material. Since abrasive only be mechanically entrapped embedded in the coating or resin binder, abrasive and easy to fall off, the short life of the wire saw. To solve this problem, the use of gas protection of the induction heating the brazing process produced diamond wire saw, diamond abrasive bonding strength. While more important point is that it uses a diamond grinding wheel of a special type triangular inserts each tooth feed amount can be up to 3.5mm. This unique blade geometry constitutes a large arc cutting edge structure, able to withstand large chip load per tooth to achieve high feed machining the tool. The above is a diamond cutting wheel  production technology introduction process.